Βασικές πληροφορίες
Κωδικός προϊόντος | FNRS2100 |
Βάρος: | 1.08 kg |
Ean: | 5903002051726 |
Προσθήκη στον κατάλογο: | 29.6.2023 |
Επιγραφές | Kompresor Electric_Tool |
Παραγωγός | Fine Art |
Υπεύθυνη οντότητα | |
A kit for beginners to learn.
This set is recommended for people starting their adventure with airbrushing, it includes a dual-function airbrush with a 0.3 mm nozzle
The set includes a compressor, an airbrush and a cable.
The cable is terminated on both sides with a 1/8" internal thread
The compressor with dimensions of 14x9cm, despite its small size, is able to pressurize up to 2.35 Bar with a capacity of 13 l / min. In addition, it has an auto switch in the adjustable range from 0.9 to 1.8 Bar. The compressor requires a 12V power supply, which is also included, connect it from the side, making sure that the knob is in the off position, i.e. fully to the left. After connecting the power supply to the power supply, we can turn on the compressor by turning the knob to the right. The lamp should light up, the more you turn it, the higher the pressure will be at the outlet. In addition, the airbrush holder is attached to the compressor.
The airbrush itself, on the other hand, is equipped with a ø.3mm nozzle, a 7ml tank with a lid and a maximum spot control system and a key to unscrew the nozzle.
A hose should be screwed to the airbrush, which in turn should be screwed to the compressor. The assembled set is ready for painting.
The whole set is dedicated mainly to learning and small modeling work or painting spray tattoos. Due to the low energy demand, the compressor can be connected to a 12V battery, so we can take it to places where we do not have access to electricity.
However, it should be remembered that the compressor is very small and, despite the efficiency of 13l / min, it should not be used all day in bright sunlight. The compressor sucks air from the bottom, so it should not be placed on sand or a very dusty place, the filter located in the inner part should be systematically cleaned, preferably with compressed air, you can use a connected airbrush for this purpose. We recommend doing this before starting work. Remember not to expose the compressor to the so-called paint mist that can clog the filter. Always keep it away from the painted item in a ventilated place.
And the airbrush is one of the cheapest airbrushes in our offer . It is available in a version with an upper detachable cup and a 0.3 mm nozzle
It is a two-finger airbrush, which means that by pressing the trigger, we start the air flow, and by pulling it back, we open the paint flow, the harder we pull the trigger, the larger the spot we get. In addition, the airbrush is equipped with a trigger lock, which is especially useful for beginners because it minimizes the risk of a blot or drip.
Λάθος στην περιγραφή; Δηλώστε το πρόβλημα
...